Showing posts with label Part Ideas. Show all posts
Showing posts with label Part Ideas. Show all posts

January 1, 2019

New Part for the New Year


Happy New Year from Centauri Spaceworks!  

To celebrate the new year, two new custom parts have been created: corridor bend left and corridor bend right.  These two parts let you offset parts with without the sharp corners for a more streamlined appearance.

The part is just slightly larger than a large station module, but narrower than the Voyager X body.  This allows it to be launched with a standard fairing.

You can access these parts by using the Centauri Part Pack for Station Designer.


June 7, 2018

Paint Shop

In Ask Andy,  the developer of Space Agency said  "I’d like to make the parts in Space Agency more customisable from within the game. Colour schemes, graphics etc."  That led some creative employees in the part idea department to think of this fun set of modules which are collectively know as the paint shop!



The first module is the applicator head. This has nozzles for applying the paint. The second is atomizer and compressor.  It prepares and processes the paint.  The third is the control unit.

When  all three are assembled in the following configuration, they make an operating paint shop that can customize the color or apply a logo to modules within a certain distance  The one exception is the modules of the paint shop.  They have been coated with a paint resistant coating for easy clean up and therefore will always retain their stock colors.


In addition to the three new modules, the paint shop would also need a new cargo:  paint!  In order to paint modules or apply logos, the paint shop must be supplied with paint.  The applicator head has two cargo slots for paint tanks.  These paint tanks get used up (like the other types of cargo) as modules are painted. The amount of paint needed to paint a module can vary from a full tank of paint for larger modules, down to a quarter of a tank of paint for applying a logo.






May 22, 2018

Shuttle Re-imagined

In Mission 30 the player recovers the shuttle, and docks it at STA.  The shuttle can't re-enter HOM because of damaged heat shields.  This post discuss an idea for how that could be fixed and we can bring the shuttle home as well as add a new feature.

Assembly

The shuttle would come in two parts: the boosters plus fuel tank, and the orbiter itself.

Splitting up the shuttle from the boosters and fuel tank would also allow for an Energia style vehicle to be constructed.  The Energia could reuse the same booster and fuel tank part, but would have a separate one time use rocket that could carry a medium payload instead of the shuttle.

After the shuttle is placed on the external tank and booster combination, the player can load up the shuttle with supplies.  A small sized payload can also be placed in the open cargo bay.

Launch

The orbiter would be launched in a side profile view, with the fuel tank and boosters on the right and the orbiter on the left.  This keeps the view consistent across all of the modes of operation.The launch tower would be displayed behind the vehicle instead of the the left.

The orbiter would follow the same pattern as other rockets of pitching over to the right during launch.  This places the orbiter on top of the external fuel tank, which is different from real life launches.  This difference is important because it sets up the orbiter in the correct orientation for re-entry with the heat shield facing down.

Shuttle on the launch pad with tower behind it


Operation

The shuttle movement would operate similar to other vehicles.  There is one additional button to support a unique feature of the orbiter.

Shuttle in orbit around HOM with controls at the bottom. One new button appears for the open doors command.


The button controls the cargo bay doors.  The cargo bay can be opened using a special button in the interface.  Once the cargo bay is open, if the cargo inside free floating.   The shuttle can be maneuvered away from the object to have it exit the cargo bay.

Shuttle on the left with cargo bay doors closed.  Shuttle on the right with cargo bay doors open and a station module shown inside


The cargo bay can also be used to capture existing objects and return them to HOM.  The shuttle can maneuver so that the object enters the empty cargo bay, and then the cargo bay doors can be closed around the object (assuming that the object would fit).  This secures the object in the cargo bay.

This cargo bay system is simple and can work with any cargo that will fit, including those that don't have a docking port.


Re-entry

The existing shuttle design works in space, but it just doesn't feel right for re-entry because of the position of the heat shield.  In other vehicles, the heat shield is positioned along one edge of the vehicle and this is edge of the vehicle that enters the atmosphere facing down.  The current shuttle is different, the heat shield is actually underneath and not really shown, so there is no way to position the vehicle with it facing down.  This can be fixed if the shuttle is shown in profile view instead of top down view.

The shuttle would re-enter similar to other vehicles.  The nose of the shuttle would be toward the right side of the screen, in the same orientation as in orbit.  The shuttle would tilt backwards and forwards due to turbulence. As it descends through the atmosphere, the goal would be to keep it level using thrusters.

Once the shuttle reaches a low enough altitude the landing gear can be deployed (instead of a parachute).  Then a cut scene would take over and show the shuttle landing on a runway.  A successful landing of the shuttle in sandbox mode awards the player one quick launch.



Mission 30

Mission 30 could be modified to use the new shuttle design with little impact.  Both designs have a docking port on one side of the vehicle.

Big thanks to  Chris @ York Space Agency for letting me bounce some of these ideas off of him.

April 19, 2018

Astronaut Dreams

You can almost recreate the moon landings in Space Agency.  Almost, because the closest thing to a man that a player can send to the moon is a tank of water.  Space Agency doesn't have astronauts.  Andy Barry, the developer of Space Agency has said that he is working towards adding astronauts.  This blog post will show a vision of what astronauts could look like.

If you visit the Space Agency Wiki, it is not a surprise that many of the players use the game to role play.  They create their own agencies and plan out missions.  Astronauts could really enhance the role playing use of the game.  In addition to building up a space-scape of stations and a fleet of vehicles; agencies could also build up a corps of astronauts!  Boring resupply mission: send the newbie astronaut to get some experience.  Harrowing shuttle rescue mission: send your top commander to make sure the job gets done.  This adds a new human dimension to the game.

Screen with name, actions, and stats for an astronaut

Above is a the astronaut detail screen that shows the player all the information about the astronaut.  The player can customize the astronaut's name and uniform coloring to help with identification.    It also shows the astronauts experience.  How many times they have launched, landed, and how many times the mission went fatally wrong.  This gives the astronaut a deeper depth than a fungible piece of cargo like a oxygen tank.

There would also be an action menu for the astronaut that could support interactions with other game play mechanics in the future. Possible ideas for these interactions include repairing modules and doing EVAs, but it isn't limited to those.  There might be no actions initially, but making providing a place for them helps to insure that the astronaut interactions can be expanded in the future.

In the space view, astronauts would work similar, but not identical, to cargo.  A new tab is added to the far left of the view menu.  This brings up the astronaut bottom panel.  

image of a station with a panel below showing several astronaut icons

Moving astronauts works similar to moving cargo.  The player drags them from the panel to the destination module.  One difference would be that the starting and destination module must be connected by an path of open doors.  Astronauts can't travel through closed doors or non-atmospheric modules.

To give a better indication of where valid move locations are, the accessible modules should be highlighted in a light green while an astronaut icon is being dragged.  The module where the astronaut will be moved to should be highlighted in a dark green.  This will help aid in moving the astronauts to smaller modules like the crew capsule and identifying closed doors that block movement.   This concept of highlighting the drop module could also be applied to cargo moves.

Another difference between cargo and astronauts is that tapping on an astronaut's icon would take you into the details for that astronaut.  That lets you access the details and possibly perform actions with the astronaut.

That covers some of how astronauts could work.  Hopefully this inspires you and Andy Barry to dream big about astronauts.  I hope to see them in the game soon soon in whatever form they take.

Centauri Spaceworks would like to thank other agencies for contributing their ideas and giving feedback:  Rimor Locus, United Space Alliance, and York Space Agency

March 29, 2018

The Problem with the LOK and Draco Trunk

If you have played Space Agency for a significant amount of time, you have probably come across a LOK vehicle docked to a station that has lost the atmosphere in the crew module section.  You can hook it up to a station with an oxygen garden, or resupply the docking module with fresh O2 and CO2 scrubbers but, the atmosphere won't refresh in the crew module.

In Space Agency you can only access one part of a vehicle, even if the vehicle is built up out of multiple parts.  Normally this isn't a problem for most vehicles, like the Orion, because the cargo is stored in the first part, not the second.  The service module just expands the fuel capacity and adds a main engine.  However, the LOK crew module and the Draco trunk are exceptions.  Both of these cargo carrying parts are used in multi-part vehicles,  and are typically not the top vehicle.  This means that their cargo area can't have items removed from it.  This makes the Draco trunk useless as a way to transport additional cargo, and the LOK will always have a limited atmosphere supply.

As a fix to this Centauri Spaceworks interface designers propose making the cargo panel scroll-able and adding in additional sections for each part that can contain cargo.  This would allow access to the Draco trunk and the LOK crew module.

The images below illustrate a potential solution.  The LOK modules only have three cargo slots but the images show eight to validate that this interface could handle any sized module.  The first image shows the first module in the vehicle.  You can see that there is an additional section below.  There up and down arrows that can be tapped or dragged to move between the sections.



The second image shows the cargo view of a subsequent module.  The initial module's cargo segment has been scrolled up.



All of the pilots and engineers at Centauri Spaceworks hope that Nooleus will implement this solution, or some solution to the problems with the LOK and Draco trunk in the next update.

Update:  The original post proposed scrolling left and right, but was later updated to scroll up and down.

March 20, 2018

Little Gripper

Centauri Spaceworks in collaboration with York Space Agency has developed another part:  the Little Gripper.  The Little Gripper solves the problem of attaching parts that don't have a docking port, like the communication satellite.  It has two ways it can work.

Fairing Cap

The Little Gripper can be built as part of a rocket where it stacks docking port side up.  This way anything you can attach a small stage to can be attached to a space station.  This works similar to how you can dock a small stage with a crew capsule on top.

For example if you want to have a Soyuz second stage power your space ship, you can add a Little Gripper to the top of it instead of a crew capsule.

In this mode the Little Gripper can transfer power and fuel to the rocket.  These connections can get hooked up while vehicle is still on the ground.  It can't transfer atmosphere.




Mount


The other way the Little Gripper can be used is secure a part without a docking port (or just without one in the right place) to an existing structure. First, the Little Gripper is docked to an existing structure.  Then the Little Gripper is powered on.  The exterior face of the Little Gripper works similar to the tip of the CSgtarm.  It has magnetic and suction attachments to be able to securely hold on to anything it is touching when the power is turned on.

The limitation with this mode is that it doesn't support fuel, air, or power connections.  It just hold the part in place and allows cargo to be transferred.


March 9, 2018

Half Solar Panel

Large solar panels are great from producing a lot of power, but they also take up a lot of space.  This results in the panel potentially blocking several adjacent docking ports.  Alrik Fons and the Part Development Group at Centauri Spaceworks have created a solar panel which solves this problem.



The half solar panel produces 50 power and consumes 2 power giving it a net output of 48 power.  This makes it the least powerful dedicated solar panel (excluding the MSS Sensor module which also is a pressurized module).

The advantage of the half solar panel is that it has three docking ports, more than any other solar panel.  These allow it to be attached in a variety of configurations.  It can be positioned to open directly out from the attached docking port like the MSS Solar panel (but has a much smaller clearance when retracted).

It can also be positioned to open perpendicular to the attached docking port.  This leaves one side of the half solar panel still clear and available for other modules to be attached.  No other solar panel has this capability.

March 2, 2018

Fuel Conversion Plant

Alrick Fons and the part development group at Centauri Spaceworks have created another part to recommend be developed by Nooleus: the fuel conversion plant.   The inclusion of this part could reduce the number of launches needed to keep the Centauri Spaceworks workshop supplied with thruster propellant.  It is similar in concept to the fuel cell part proposed back in August 2017.  Unlike the fuel cell part, the fuel conversion plant takes extra main engine fuel and converts it into thruster propellant (or vice versa).


While amazing and a big resource saver, this process is intense and time consuming.  The conversion plant consumes 200 power when processing fuel.  It also takes 5 minutes for it to convert one tank of main engine fuel to thruster propellant.  To run this process (and store the fuel), the conversion plant requires a significant amount of equipment.  This makes it one of the biggest and heaviest modules in the game, along with the large fuel silo.


October 9, 2017

Rotator Hub


Alrick Fons, and his team of engineers at Centauri Spaceworks has designed a special hub.  Unlike normal hubs, it can rotate to change the angle between the two docking ports.  It has a full 180 degrees of rotation.   The two docking ports can form an angle as small as 90 degrees, or as large as 180.  Hopefully this part will be manufactured by Nooleus and added into the game.

Due to the rotation mechanism, this hub does not have any cargo storage.

The rotation is controlled on the power panel.  In addition to having an on and off switch, it has a left and a right button that will change the orientation of the docking ports by holding them down.

The hub with the smaller number of modules is the one that rotates. If there are two modules on one side, and four modules on the other side, the side with 3 modules is the one that rotates.  It needs at least one module attached to supply the power to rotate, since it doesn't have any internal storage space for a battery.  It can rotate a maximum of 6 modules before it becomes to heavy for the motor.

Changing the orientation takes power.  Normally the rotator hub uses 10 power.  However, when rotating the power consumption increases.  It uses 30 power if one docking port is open.  If both ports are docked, it uses an additional 50 power per module on the smaller side.  In the example with three modules on one side and four on another, it would use 200 power to rotate.  There are three modules on the smaller side, 3 × 50 = 150.  The module uses 30 power for itself so that brings the total to 30 + 150 = 180 power.  It maxes out at 330 power when the modules have too much mass for it to rotate without burning out the motor.

September 18, 2017

CSgtarm

There are always parts that are tricky to re-arrange: Voyager-X antenna, MSS sensor module,  solar panels.  Basically, any part that only has a single docking port.  Previously, the only way to re-arrange these parts was to un-dock them and then chase them down before they flew off into deep space.  This consumed fuel and was difficult if the part had any rotation transferred to it from the un-docking procedure.  

The CSgtarm is robotic manipulator arm that makes it easier to move parts in space.  It is based on the famous Canadarm.   It allows the operator to move parts that don't have a free docking port to attach to.  



The CSgtarm has 4 sets of controls.  Three of these sets control the rotation of the arm and gripper tip sections.  The fourth controls if the gripper tip section is activated or not.

When the gripper tip is activated, it tries to attach to any module that it is touching.  Its combination of magnetic and suction grippers are able to firmly attach to any module.  Once the gripper is firmly attached, the arm can be used to move the module anywhere within reach.

Centauri Spaceworks is currently searching someone, perhaps Nooleus, to construct the CSgtarm from the blueprints above.  The CSgtarm is named after CSgt for his many contributions to the Space Agency wiki.

August 16, 2017

Fuel Cell


Centauri Spaceworks has an excess of main engine fuel at its shipyard.  Every week a new fuel silo is sent up from HOM to replenish the supplies.  All of the thruster propellant goes to refueling the station builder tugs that have been busy constructing new ships and stations.  Without having to travel long distances, the tug's fuel tanks remain almost full of main engine fuel and only need a small topping off each week.  The nearly full main fuel tanks have started stacking up.


Lead Engineer, Alrick Fons, has proposed a use for all this extra main engine fuel:  turn it into power.  Centauri Spaceworks has a need for a compact power source for its spaceships designs.  Alrick designed a fuel cell that will convert the fuel and oxidizer into power.  Water is also produced as a by product of the reaction.

Fuel Cell module concept

The fuel cell is estimated to produce up to 120 units of power.  It has storage equivalent to an ATV.  At full capacity it contains enough fuel to power the module for 30 minutes.  This also results in two full containers of water. Fuel consumption can be reduced if the power load is reduced.

In order to avoid power outages, the fuel tank has an auto refill feature.  When enabled, it automatically turns on the fuel pump when the tank falls below 1/4.  It shuts off when the tank is full, or when there is no remaining fuel to pump.

Alrick has also suggested that this process could be reversed as well.  He has top engineers at Centauri Spaceworks are working on developing a module to convert water and power into thruster propellant.  This will reduce the amount of fuel silos that need to be launched each month to support to work constructing spaceships.  Look for more information about the fuel manufacturing module in a future update.

June 27, 2017

More Hubs

Left to right: 120° hub, long hub, and standard hub (for reference)
Centauri Spaceworks has designed two new parts that enable the creation of more varied stations and ships: the 120° hub and the long hub.  Hopefully our part supplier, Nooleus, will manufacture these parts soon.

The 120° hub enables the creation of hexagonal and angled stations.  It has the same dimension as the standard hub.  Instead of four ports at a 90°, it has 3 ports spaced at 120°.  The larger spacing between ports means that it can fit all existing parts without modification.  It consumes 5 power, the same amount as the standard hub.

The long hub provides a way to dock large modules side by side.  Two standard hubs don't quite provide enough separation to dock small modules side by side.  While possible it requires a slight overlap between the modules and docking must be done carefully via the docking auto-alignment glitch.  The second module must be docked at an angle away from the 1st so that the connect before the sides collide.   The process of auto alignment straightens it out, but doesn't do collision detection so the the two small modules end up docked but overlapping slightly.  This also causes them to shoot off wildly or explode when they are undocked.

The long hub it the height (or width depending on how you look at it) of a large station module.  This means that if you connect two long hubs together via port 1 (the port with the white dot), you can dock in two large station modules side by side without any overlap.

The long hub can also be used when a hub is too short, but adding in a standard station module would add too much length.   Due to the extra size, this part consumes 8 power.